| 不同形貌纳米纤维素对天然橡胶力学性能的影响 |
| Effect of Nanocellulose with Different Morphologies on the Mechanical Properties of Natural Rubber |
| 投稿时间：2018-08-29 修订日期：2018-08-29 |
| DOI：10.12136/j.issn.1000-890X.2019.07.0517 |
| 中文关键词: 纳米纤维素 纤维素纳米丝 纤维素纳米晶 天然橡胶 浇注成膜 力学性能 补强 |
| 英文关键词: nanocellulose cellulose nanofibril cellulose nanocrystal NR cast film mechanical properties reinforcing |
| 基金项目:贵州省普通高等学校科技拔尖人才支持技划（黔教合KY字[2016]089）；贵阳市财政支持贵阳学院学科与硕士点建设项目[HC-2019]；贵州省一流大学专业建设项目（2017158134） |
|
| 摘要点击次数: 1250 |
| 全文下载次数: 530 |
| 中文摘要: |
| 将两种纳米纤维素[纤维素纳米丝（CNF）和纤维素纳米晶（CNC）]与天然胶乳通过溶液共混和浇注成膜制备CNF/天然橡胶（NR）和CNC/NR复合材料，考察CNF和CNC对NR的补强效果。结果表明：CNF与CNC对NR都具有补强效果，当二者用量相同时，CNF对NR的补强效果更显著；在成膜过程中，CNC发生沉降，在底部形成CNC富集层；当CNC用量大于5份时，CNC/NR复合材料在拉伸过程中CNC富集层发生滑脱分层；纳米纤维素与NR的极性相差较大，提高二者的相容性和界面结合力需进一步研究。 |
| 英文摘要: |
| Two kinds of nanocellulose: cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) were solution blended with natural rubber (NR), and casting into films to obtain natural rubber/cellulose nanofibrils and natural rubber/cellulose nanocrystals composites. The impact of the content of the nanocellulose on the mechanical properties of natural rubber was studied. The results showed that both the CNF and CNC had an obvious reinforcing effect, and the reinforcing effect of CNF on NR is more significant than that of CNC with the same content. In addition, the CNC would settle down from the solution during the casting process and form a layer with enriched CNC at the bottom. When the CNC content was higher than 5%, the enriched CNC layer fell off from the film during the tensile test. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
