| 轮胎模具弓形座刚度计算及疲劳寿命分析 |
| Mechanics Calculation and Fatigue Life Analysis of Tire Mold Slider |
| 投稿时间：2018-03-08 修订日期：2018-03-21 |
| DOI：10.12136/j.issn.1000-890X.2019.10.0782 |
| 中文关键词: 轮胎模具 弓形座 刚度 悬臂厚度 疲劳寿命 安全因数 |
| 英文关键词: tire mold slider stiffness cantilever thickness fatigue life safety factor |
| 基金项目: |
|
| 摘要点击次数: 1164 |
| 全文下载次数: 647 |
| 中文摘要: |
| 根据实际工况确定轮胎模具弓形座力学计算式，通过CAD/CAE及疲劳寿命分析软件模拟分析不同上部悬臂厚度和材料的弓形座疲劳寿命和安全因数。结果表明：上部悬臂厚度增大，弓形座疲劳寿命明显延长和安全因数明显增大；40Cr材料（钢）弓形座的疲劳寿命长于和安全因数大于QT450-10材料（球墨铸铁）弓形座。 |
| 英文摘要: |
| Abstract：The mechanics calculation formula of tire mold slider was determined according to the actual
working condition. The fatigue life and safety factor of slider with different upper cantilever thickness and
material were simulated and analyzed by CAD/CAE and fatigue life analysis software. The results showed
that the fatigue life of the slider was significantly prolonged and the safety factor was significantly enlarged
as the thickness of the upper cantilever increased. The fatigue life of the slider made of 40Cr material was
longer than that of the slider using QT450-10 material，and the safety factor of the 40Cr steel slider was also
bigger. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
