| 表面缺陷对硅橡胶密封件接触特性影响的试验研究 |
| Experimental Study on Effects of Surface Defects on the Contact Characteristics of Silicone Rubber Seal |
| 投稿时间：2017-02-27 修订日期：2017-02-27 |
| DOI： |
| 中文关键词: 密封件 硅橡胶 表面缺陷 接触特性 |
| 英文关键词: seal silicone rubber surface defect contact characteristic |
| 基金项目:航天支撑技术基金 |
|
| 摘要点击次数: 1380 |
| 全文下载次数: 609 |
| 中文摘要: |
| 以典型舱门橡胶密封件为研究对象，基于自制的密封接触特性试验装置，研究不同直径表面缺陷对硅橡胶密封件表面接触特性的影响。结果表明：缺陷直径对接触面积和平均接触压力影响较大，缺陷直径越大，接触面积越小，平均接触压力略有增大；缺陷直径对缺陷周围接触效果影响较大，直径越大，接触特性越差；表面缺陷对密封件密封性能影响显著。 |
| 英文摘要: |
| Based on the developed device for testing sealing contact characteristics，a typical door rubber seal was used to study the effect of different diameters surface defects on the contact characteristic of the sealing interface surface.The results showed that the defect diameter had great effect on the contact area and average contact pressure，when the defect diameter increased，the contact area decreased，and the average contact pressure slightly increased.Defect diameter effects the contact performance in the surrounding area of the defect，when the defect diameter increased，the contact performance decreased；the surface defects had significant effects on the sealing performance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
