文章摘要
频率和功率对轮胎微波加热的影响
Influence of Frequency and Power on Microwave Heating for Tire
  
DOI：
中文关键词: 轮胎  微波加热  功率  频率  温度场  有限元模拟
英文关键词: tire  microwave heating  power  frequency  temperature field  finite element simulation
基金项目:山东省科技发展计划项目（2012GSF11604）；山东省自然科学基金资助项目（ZR2013EEL009）
作者单位
李涛 青岛科技大学 机电工程学院 
张伟 青岛科技大学 机电工程学院 
陈海龙 青岛科技大学 机电工程学院 
梁云 青岛科技大学 机电工程学院 
李庆领 青岛科技大学 机电工程学院 
摘要点击次数: 864
全文下载次数: 541
中文摘要:
      在双波导入射功率均为5 kW时，分别对（915±25） MHz频率范围和925 MHz频率时的双波导不同功率分配下的微波加热效率以及轮胎温度场分布进行了模拟。结果表明：微波加热效率随微波频率的变化呈类似于正/余弦曲线波动，在微波作用频率为925 MHz时，微波加热效果最好；双波导功率分配越趋近于一致，微波加热效率越高，轮胎温度场分布越均匀。
英文摘要:
      The microwave heating efficiency and the temperature field distribution of tire were investigated within the frequency range of （915±25） MHz at the conditions that the input powers of dual waveguides were both 5 kW and at the frequency of 925 MHz with different power distribution, respectively. The results showed that，microwave heating efficiency was similar to a sine/cosine curve along with the change of frequency fluctuation，and the microwave heating effect was the best when the frequency was 925 MHz.When the power distribution of dual waveguides was closer，the heating efficiency was higher and the temperature field distribution of the tire was more uniform.
Author NameAffiliation
LI Tao Qingdao University of Science and Technology 
ZHANG Wei Qingdao University of Science and Technology 
CHEN Hailong Qingdao University of Science and Technology 
LIANG Yun Qingdao University of Science and Technology 
LI Qingling Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭