文章摘要
橡胶微波-传统联合加热硫化研究
Study on Vulcanization Process of Rubber by Combination of Microwave and Traditional Heating
  
DOI：
中文关键词: 橡胶  微波加热  微波-传统联合加热  硫化过程  温度分布
英文关键词: rubber  microwave heating  combination of microwave and traditional heating  vulcanization process  temperature distribution
基金项目:山东省科技发展计划项目（2012GSF11604）；山东省自然科学基金资助项目（ZR2013EEL009）
作者单位
陈海龙 青岛科技大学 机电工程学院 
李涛 青岛科技大学 机电工程学院 
张伟 青岛科技大学 机电工程学院 
梁云 青岛科技大学 机电工程学院 
李庆领 青岛科技大学 机电工程学院 
摘要点击次数: 860
全文下载次数: 643
中文摘要:
      运用ANSYS有限元分析软件，对圆波导模式下橡胶的微波-传统联合加热硫化过程进行仿真模拟，并与微波加热硫化过程进行对比。结果表明：仅采用微波加热方式，硫化胶内部温度较高，外部温度较低；而采用传统加热与微波加热相结合的方式，加热一定时间后，胶料内外能够同时被加热，胶料内部的温度梯度较小，内部温度分布较均匀。
英文摘要:
      The vulcanization process of rubber with combination of microwave and traditional heating was simulated in circular waveguide mode by finite element analysis software ANSYS，and compared with microwave heating vulcanization.The results showed that，the inner temperature of rubber vulcanizate was high while the outer was still low during microwave heating vulcanization.With combination of microwave heating and traditional heating，both the inside and outside of rubber vulcanizate could be heated after a few minutes，the temperature gradient inside the rubber vulcanizate was smaller，and thus the temperature distribution was more uniform.
Author NameAffiliation
CHEN Hailong Qingdao University of Science and Technology 
LI Tao Qingdao University of Science and Technology 
ZHANG Wei Qingdao University of Science and Technology 
LIANG Yun Qingdao University of Science and Technology 
LI Qingling Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭