| 基于ANSYS的防尘密封圈密封性能研究 |
| Performance of Dustproof Sealing Ring Based on ANSYS |
| |
| DOI： |
| 中文关键词: A型防尘密封圈 本构模型 接触问题 非线性有限元分析 |
| 英文关键词: type A dustproof sealing ring constitutive model contact problem nonlinear finite element analysis |
| 基金项目: |
|
| 摘要点击次数: 972 |
| 全文下载次数: 585 |
| 中文摘要: |
| 借助大型有限元分析软件ANSYS，针对A型防尘密封圈（简称A型圈）大变形和非线性特征，建立以氟橡胶、丁腈橡胶、聚氨酯为基体的3种不同橡塑材料A型圈的非线性有限元分析模型，对3种材料A型圈进行了最大接触应力、平均接触应力及应力分布的分析对比。研究结果表明，A型圈唇部长度及唇尖厚度变化对接触应力及其分布形式有重要影响。 |
| 英文摘要: |
| By using ANSYS software，according to nonlinear characteristics and large deformation of type A dustproof sealing ring，nonlinear finite element analysis models of type A dustproof sealing ring made of three kinds of rubber/plastic blends which were based on fluorine rubber，nitrile-butadiene rubber and polyurethane rubber，respectively，were established.The maximum contact stress，average contact stress and their distribution were analyzed and compared.The results showed that the change of the lip length and thick-ness of type A dustproof seals had significant influence on the contact stress and its distribution. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
