| 多联硫化机上横梁构型有限元分析及优化 |
| Optimization and Analysis of Structure Type of Upper Beam of Multiple Curing Press based on FEM |
| 投稿时间：2016-09-05 修订日期：2016-09-05 |
| DOI： |
| 中文关键词: 多联硫化机 上横梁 构型 有限元分析 优化 |
| 英文关键词: Multiple curing press Upper beam Structure Type FEM Optimization |
| 基金项目: |
|
| 摘要点击次数: 977 |
| 全文下载次数: 519 |
| 中文摘要: |
| 上横梁在硫化机工作时是承受锁模力的关键部位, 其强度和刚度不仅影响硫化机的寿命,而且影响锁模精度。本文利用ANSYS有限元分析软件对多联硫化机上横梁不同构型进行了比较分析,在满足刚度和强度要求的基础上,经过对原结构进行改进和优化,上横梁总质量降低了22.8%,降低了成本。 |
| 英文摘要: |
| The upper beam is the key part to support the clamping force when the curing press working, it"s strength and rigidity not only affect the service life, but also affect the precision of the mould. This paper, the finite element analysis software ANSYS is used to a comparative analysis of different structure type of upper beam of multiple curing press. After some improvement and optimization for the original structure in the condition of meeting the requirements of material strength and stiffness, the total mass of the upper beam decreased 22.8 percent, reducing the cost. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
