| 橡胶挤出机销钉机筒温控过程数值模拟 |
| Simulation on Temperature Control Process for Pin Barrel of Rubber Extruder |
| 投稿时间：2016-02-25 修订日期：2016-02-29 |
| DOI： |
| 中文关键词: 橡胶挤出机 销钉机筒 温度控制 温度场模拟 |
| 英文关键词: rubber extruder pin barrel temperature control temperature field simulation |
| 基金项目: |
|
| 摘要点击次数: 1359 |
| 全文下载次数: 632 |
| 中文摘要: |
| 将PID算法与数值模拟相结合，模拟销钉机筒的动态温控过程，研究机筒温度稳定状态下的动态温度分布情况及PID参数对机筒温度变化和冷却系统工作时间的影响。结果表明：稳定状态下机筒温度动态分布；PID参数对机筒温控过程影响较为显著，但达到稳定状态后，对冷却水通入累积时间比例的影响很小。本研究有助于对橡胶销钉挤出机机筒冷却结构及控制算法进行优化。 |
| 英文摘要: |
| Combining PID algorithm and numerical simulation，the dynamic temperature control process for pin barrel of rubber extruder was simulated to investigate the dynamic temperature distribution of the barrel under the temperature steady state，and the effects of PID parameters on the temperature variation and working time of the cooling system for the barrel.The results showed that，the temperature distribution of the barrel under the temperature steady state was dynamic，and the PID parameters had significant effect on the temperature control process，but had a little effect on accumulation time ratio of cooling water through the barrel，which could be helpful to optimize the cooling structure for the pin barrel of rubber extruder and control algorithm. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
