文章摘要
增塑剂TP-95用量对丙烯酸酯橡胶性能的影响
Effect of Plasticizer TP-95 0n Properties of ACM
  
DOI：
中文关键词: 丙烯酸酯橡胶  增塑剂  耐低温性能  耐油性能  
英文关键词: ACM  plasticizer  low temperature resistance  oil resistance
基金项目:
作者单位
朱宝莉 北京化工大学北京市新型高分子材料制备及加工重点实验室；北京化工大学有机无机复合材料国家重点实验室 
邹华 北京化工大学北京市新型高分子材料制备及加工重点实验室；北京化工大学有机无机复合材料国家重点实验室； 
张立群 北京化工大学北京市新型高分子材料制备及加工重点实验室；北京化工大学有机无机复合材料国家重点实验室； 
摘要点击次数: 1458
全文下载次数: 504
中文摘要:
      研究醚酯类增塑剂TP-95用量对丙烯酸酯橡胶（ACM）性能的影响，并与增塑剂DOP进行对比。结果表明：增塑剂TP 95的增塑效果优于增塑剂DOP，增塑剂TP-95增塑ACM硫化胶的耐热老化性能较好，耐油性能相当；随着增塑剂TP-95用量的增大，ACM胶料的门尼粘度下降，硫化胶的硬度、100%定伸应力和拉伸强度减小，压缩永久变形无明显变化，耐低温性能和耐油性能显著提高。
英文摘要:
      The effect of the addition level of ether ester plasticizer TP-95 0n the properties of ACM was investigated，and compared with plasticizer DOP. The results showed that，the plasticizing effect of TP-95 was better than DOP，the aging resistance of ACM with TP-95 was better，while the oil resistances was the same. As the addition level of TP-95 increased， the Mooney viscosity of the ACM compound decreased，the Shore A hardness，modulus at 100% elongation and tensile strength of the ACM vulcanizates decreased，the compression set showed little change，and the low temperature resistanceand oil resistance were improved.
Author NameAffiliation
ZHU Bao-li Beijing Univer.sity of Chemical Technology 
ZOU Hua Beijing Univer.sity of Chemical Technology 
ZHANG Li-qun Beijing Univer.sity of Chemical Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭