| 多层橡胶片材层叠复合表面压延质量分析及改善措施 |
| Quality Analysis and Improvement Methods of Surface of Multi-layered Rubber Composite Sheet |
| |
| DOI： |
| 中文关键词: 橡胶 多层复合 压延 表面质量 |
| 英文关键词: rubber multi-layer composite calendering surface quality |
| 基金项目: |
|
| 摘要点击次数: 719 |
| 全文下载次数: 425 |
| 中文摘要: |
| 根据多层橡胶片材层叠复合的原理，分析采用压延工艺制备出的复合片材表面出现不平整、不均匀，产生皱纹、鱼鳞纹的现象，提出相应的解决措施。试验得出，压延机辊筒温度为100 ℃、辊速为24 m·min-1时，压延的复合片材表面质量较好。 |
| 英文摘要: |
| Based on the lamination principle of multi-layered rubber composite sheet，the root causes for unevenness， non-uniform， wrinkle and ripple on the surface of the composite sheet were analyzed，and the improvement methods were proposed.By precisely controlling calendering process，setting the roller temperature at 100 ℃ and the speed at 24 m·min-1，the surface quality of the calendered composite sheet was improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
