文章摘要
溶聚丁苯橡胶挤出畸变行为的研究
Study on Extrudate Distortion of Solution Polymerized Styrene-Butadiene Rubber
  
DOI：
中文关键词: 溶聚丁苯橡胶  炭黑  混炼胶  流变性能  挤出畸变
英文关键词: solution polymerized styrene－butadiene rubber  carbon black  compound  rheological property  extrudate distortion
基金项目:
作者单位
张昊 青岛科技大学 橡塑材料与工程教育部重点实验室 
董彬 青岛科技大学 橡塑材料与工程教育部重点实验室 
孙显茹 青岛科技大学 橡塑材料与工程教育部重点实验室 
吴其晔 青岛科技大学 橡塑材料与工程教育部重点实验室 
摘要点击次数: 834
全文下载次数: 427
中文摘要:
      研究两种不同结构的溶聚丁苯橡胶（SSBR-T2003和SSBR-2305）生胶及混炼胶的挤出畸变行为及机理。结果表明：两种生胶挤出时均发生整体挤出畸变，其中SSBR-2305的畸变更严重，这与该胶料相对分子质量大、分子链结构为端基锡偶联有关，而畸变根源来自于口模入口区强烈的拉伸流动失稳。填充炭黑可显著改善SSBR熔体的挤出流变性能，抑止整体畸变。炭黑的加入不仅降低了胶料的熵弹性，同时有稳定入口区流场的作用。SSBR-2305混炼胶在高剪切速率下出现类似第二光滑挤出现象。
英文摘要:
      The extrudate distortion behavior and its mechanism of the raw rubber and compound of solution polymerized styrene-butadiene rubbers （SSBR-T2003 and SSBR-2305） having different structure were investigated.In raw rubber extrusion，extrudate distortion occurred for both SSBR-T2003 and SSBR-2305 and the distortion of SSBR-2305 was worse due to higher molecular weight and branched structure.The distortion was caused by unstable extensional flow at the die entrance.With the addition of carbon black，the rheological property of compound could be improved，the entropy elasticity of compound was reduced and the flow field at the die entrance was stabilized.Therefore，the overall distortion was reduced.The smooth surface of extruded SSBR-2305 compound could also be obtained under high shear speed.
Author NameAffiliation
ZHANG Hao Qingdao University of Science and Technology 
DONG Bin Qingdao University of Science and Technology 
SUN Xianru Qingdao University of Science and Technology 
WU Qiye Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭