钼系支化高乙烯基聚丁二烯橡胶动态力学性能的研究 |
Study on Dynamic Properties of Molybdenum-catalyzed Branched HVPBR |
|
DOI: |
中文关键词: 高乙烯基聚丁二烯橡胶 BR ESBR SSBR 动态力学性能 损耗因子 |
英文关键词: HVPBR BR ESBR SSBR dynamic properties loss factor |
基金项目:国家自然科学基金资助项目(50603009) |
|
摘要点击次数: 894 |
全文下载次数: 10 |
中文摘要: |
应用RPA2000橡胶加工分析仪研究钼系支化高乙烯基聚丁二烯橡胶(b-HVPBR)的动态力学性能,并与BR、乳聚丁苯橡胶(ESBR)和溶聚丁苯橡胶(SSBR)进行对比。结果表明:在试验频率范围内,b-HVPBR(低频下)的剪切储能模量(G′)大于BR,SSBR和ESBR,损耗模量(G″)和损耗因子(tanδ)小于BR,SSBR和ESBR,复数粘度(η*)呈现假塑性流体的特征;在试验温度范围内,b-HVPBR的G′大于BR,SSBR和ESBR, tanδ值小于BR,SSBR和ESBR;在试验应变范围内,b-HVPBR的G′大于BR,SSBR和ESBR, tanδ值小于BR,SSBR和ESBR。 |
英文摘要: |
The dynamic properties of molybdenum-catalyzed branched HVPBR(b-HVPBR) were studied by using rubber processing analyzer (RPA2000),and compared with those of BR,ESBR and SSBR.The results showed that,in the range of experimental frequency,the storage modulus (G′) of b-HVPBR was the highest under low frequency,the loss modulus (G″) and loss factor ((tanδ) were smaller than those of BR,ESBR and SSBR,respectively,and their complex viscosity (η*) showed the same trait with that of pseudoplastic fluid.In the range of experimental temperature or strain,the G′ of b-HVPBR was higher than that of BR,ESBR and SSBR,and the (tanδ was smaller. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |