文章摘要
超细石墨/HNBR复合材料的性能研究
Study on properties of submicrometer-graphite/HNBR composite
  
DOI：
中文关键词: 超细石墨  氢化丁腈橡胶  耐磨性能
英文关键词: submicrometer-graphite  HNBR  abrasion resistance
基金项目:
作者单位
史俊红 北京化工大学 北京市新型高分子材料制备与加工重点实验室 
杨建 北京化工大学 北京市新型高分子材料制备与加工重点实验室 
田明 北京化工大学 教育部纳米材料重点实验室 
张立群 北京化工大学 北京市新型高分子材料制备与加工重点实验室；北京化工大学 教育部纳米材料重点实验室 
摘要点击次数: 1028
全文下载次数: 3
中文摘要:
      采用机械共混法制备超细石墨/氢化丁腈橡胶（HNBR）复合材料，研究超细石墨用量对超细石墨/HNBR复合材料性能的影响。结果表明，超细石墨用量对复合材料的硫化特性影响不大；随着超细石墨用量的增大，复合材料的邵尔A型硬度变化不大，100％定伸应力增大，拉伸强度和拉断伸长率减小，撕裂强度有所降低，体积磨耗量先增大后减小；当超细石墨用量达到40份时，复合材料的摩擦因数明显减小。
英文摘要:
      A submicrometer-graphite/HNBR composite was prepared by mechanical blending method，and the effects of the addition level of submicrometer-graphite on the properties of the composite were investigated.The results showed that the addition level of submicrometer-graphite had little effect on the curing behavior of the composite；the Shore A hardness of the composite changed a little，the tensile strength，elongation at break and tear strength decreased，and the abrasion loss increased at first and then decreased as the addition level of submicrometer-graphite increased；the friction coefficient of this material decreased significantly when 40 phr submicrometer-graphite was used.
Author NameAffiliation
SHI Jun-hong Beijing University of Chemical Technology 
YANG Jian Beijing University of Chemical Technology 
TIAN Ming Beijing University of Chemical Technology 
ZHANG Li-qun Beijing University of Chemical Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭