胶粉/高密度聚乙烯热塑性弹性体的性能研究 |
Properties of crumb rubber/HDPE thermoplastic elastomer |
|
DOI: |
中文关键词: 胶粉 高密度聚乙烯 热塑性弹性体 改性 |
英文关键词: crumb rubber HDPE TPE modification |
基金项目:国家自然科学基金资助项目(59903001) |
|
摘要点击次数: 1026 |
全文下载次数: 14 |
中文摘要: |
制备胶粉/高密度聚乙烯(HDPE)热塑性弹性体(TPE),并研究其性能。结果表明,混炼温度从150 ℃提高到200 ℃时,胶粉/HDPE TPE的强伸性能降幅较大,但流变性能较好,且挤出物表观质量较好,混炼温度以150 ℃为宜;胶粉改性时过辊次数增加可使其粒径进一步减小,从而提高改性胶粉/HDPE TPE的物理性能,但过辊次数增至一定程度时会使胶粉分子链降解,致使改性胶粉/HDPE TPE的物理性能降低;胶粉/HDPE TPE的返炼性能良好。 |
英文摘要: |
A crumb rubber/HDPE thermoplastic elastomer(TPE) was prepared and its properties were investigated.The results showed that the tensile strength of crumb rubber/HDPE TPE decreased significantly,but its rheological property and appearance quality of its extrudate improved by increasing the mixing temperature from 150 ℃ to 200 ℃,and the most suitable mixing temperature was 150 ℃;the increase of mill runs during modification of crumb rubber would make the particle size of crumb rubber finer resulting in the improved physical properties of modified crumb rubber/HDPE TPE,but as the mill runs increased over a certain level,the molecular chains of crumb rubber would break down resulting in poorer physical properties of modified crumb rubber/HDPE TPE;and the modified crumb rubber/HDPE TPE had good remillability |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |