文章摘要
橡胶在混炼条件下的焦烧特性
Scorch safety of rubber compound during internal mixing
  
DOI：
中文关键词: 混炼焦烧特性  NR  BR  SBR  NBR
英文关键词: mixing scorch safety  NR  SBR  BR  NBR
基金项目:
作者单位
林雅铃 华南理工大学 材料科学与工程学院 
张安强 华南理工大学 材料科学与工程学院 
王炼石 华南理工大学 材料科学与工程学院 
蒋智杰 华南理工大学 材料科学与工程学院 
周奕雨 华南理工大学 材料科学与工程学院 
摘要点击次数: 932
全文下载次数: 1
中文摘要:
      采用Brabender转矩流变仪，在混炼温度为100~ ℃和混炼转子转速为20~80 r·min-1的条件下测试了4个胶种（NR，SBR，BR和NBR）的混炼焦烧特性(ts和Δt)，并与门尼焦烧特性（t5和Δt30）进行比较，指出门尼焦烧不能真正地反映混炼胶在实际加工过程中的焦烧特性。根据试验数据，拟合了4个胶种的ts和Δt与混炼温度、转子转速关系的模型。方差、回归分析结果表明，该模型可以用来很好地表征混炼焦烧性能与混炼温度和转子转速之间的关系。
英文摘要:
      The mixing scorch safety (ts and Δt) of four kinds of rubber compounds (NR，SBR，BR and NBR) was measured using a Brabender torque rheometer in a wide temperature range (100~140 ℃) and rotor speed range (20~80 rpm)，and compared to Mooney scorch safety (t5 and Δt30).It was pointed out that the real scorch safety of rubber compound during mixing couldn’t be reflected by Mooney scorch safety.The model for mixing scorch safety of four rubber compounds in function of mixing temperature and rotor speed was established by fitting the data from the test.It was found by the square error and regression analyses that the dependance of mixing scorch safety on mixing temperature and rotor speed could be well characterized by the model.
Author NameAffiliation
LIN Ya ling South China University of Technology 
ZHANG An qiang South China University of Technology 
WANG Lian shi South China University of Technology 
JIANG Zhi jie South China University of Technology 
ZHOU Yi yu South China University of Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭