文章摘要
本文二维码信息
二维码(扫一下试试看!)
电子辐照预硫化在载重子午线轮胎内衬层生产中的应用
Application of Electron Beam Radiation Pre-vulcanization in Production of Transitional Layer of Truck and Bus Radial Tire
  
DOI:
中文关键词: 载重子午线轮胎;内衬层;电子辐照;预硫化
英文关键词: truck and bus radial tire;transitional layer;electronic beam radiation;pre-vulcanization
基金项目:
中图分类号:U463.341.3/.6;TQ330.67
Author NameAffiliation
LI Peng Triangle Tire Co.,Ltd 
WANG Peibin Triangle Tire Co.,Ltd 
SUN Baoyu Triangle Tire Co.,Ltd 
LIU Qian Triangle Tire Co.,Ltd 
Hits: 629
Download times: 330
中文摘要:
      研究辐照预硫化技术在载重子午线轮胎内衬层生产中的应用。试验结果表明:内衬层胶片经电子束辐照预硫化后,胶料的100%定伸应力、拉伸强度和拉断伸长率变化较小;而同一厚度的胶片门尼粘度随辐照剂量的增加,先快速升高后降低,焦烧时间先快速下降后平稳;同一辐照剂量不同厚度预硫化胶料的门尼粘度和焦烧时间不同。选择合适辐照剂量生产的内衬层半成品用于12R22.5载重子午线轮胎,对轮胎肩部断面胶料分析发现,预硫化面流动性和层间渗透减弱,且轮胎的耐久性能和均匀性有所提高。
英文摘要:
      The application of electron beam(EB)radiation pre-vulcanization in the production of truck and bus radial tire transitional layer was investigated.The experiment results showed that,when the transitional layer was pre-cured by EB radiation,the modulus at 100% elongation,tensile strength and elongation at break of the compound had little change.For the same thickness sample,with increasing of radiation dose,the Mooney viscosity increased fast at first,then slightly decreased,and the scorch time was shortened quickly to a stable value.With the same radiation dose,the samples with different thickness had a different Mooney viscosity and scorch time.It was found by the analysis of the compounds on shoulder section that,with suitable radiation dose for the transitional layer of 12R22.5 truck and bus radial tire,the pre-vulcanization layer had lower flowability and permeability,and the endurance performance and uniformity of the finished tire were improved.
View Full Text   View/Add Comment  Download reader
Close