文章摘要
本文二维码信息
二维码（扫一下试试看！）
35×12.50R22LT 117Q 10PR泥石花纹轮胎的设计
Design on 35x12.50R22LT 117Q 10PR Mudrock Pattern Tire
Received:August 16, 2017  Revised:August 16, 2017
DOI：
中文关键词: 泥石花纹轮胎；结构设计；施工设计
英文关键词: mudrock pattern tire；structure design；construction design
基金项目:
中图分类号:
Author NameAffiliationE-mail
Yin Daming* TIRE TECHNOLOGY ALLIANCE od0019@tta-solution.com 
Liu Jianmei TIRE TECHNOLOGY ALLIANCE  
Lu Shaojun TIRE TECHNOLOGY ALLIANCE  
Zhu Qingshuai TIRE TECHNOLOGY ALLIANCE  
Zhou Ruixiang Shandong duoluchi rubber co. LTD  
Chu Xinchao Shandong duoluchi rubber co. LTD  
Hits: 792
Download times: 395
中文摘要:
      介绍35×12.50R22LT 117Q 10PR泥石花纹轮胎的设计。结构设计：外直径　877 mm，断面宽　322 mm，行驶面宽度　258.3 mm，行驶面弧度高　10.282 mm，胎圈着合直径　559.2 mm，胎圈着合宽度　287.02 mm，断面水平轴位置（H1/H2）　0.951，采用对称花纹设计，花纹深度　16 mm，花纹饱和度　51.8%，花纹周节数　40。施工设计：带束层采用3×0.2＋6×0.35HT钢丝帘布，胎体采用1440dtex/2-104聚酯帘布，钢丝圈采用Φ1.295 mm回火钢丝；采用二次法成型机成型，液压硫化机硫化。成品性能试验结果表明，成品轮胎的外缘尺寸、强度性能、耐久性能及高速性能均符合相关标准和设计要求。
英文摘要:
      The design on 35×12.50R22LT 117Q 10PR mudrock pattern tire was described.In structure design，the following parameters were taken：overall diameter　877 mm，cross-sectional width　322 mm，width of running surface　258.3 mm，arc height of running surface　10.282 mm，bead diameter at rim seat　559.2 mm，bead width at rim seat　287.02 mm，maximum width position of cross-section （H1/H2）　0.951，symmetrical pattern design for tire，pattern depth　16 mm，block/total ratio　51.8%，and total number of pattern pitches　40.In construction design，the following processes were taken：3×0.2＋6×0.35HT steel cord for belt，1440dtex/2-104 polyester cord for carcass ply，Φ1.295 mm tempered wire for bead；and using two stage building machine to build tire and hydraulic vulcanization machine to cure tire.It was confirmed by the finished tire test that the inflated peripheral dimension，strength，endurance and high speed performance met the requirements of relative standards and design.
View Full Text   View/Add Comment  Download reader
Close