|
二维码（扫一下试试看！） |
| 实心轮胎电磁感应加热硫化工艺 |
| Vulcanization Technology of Solid Tire Using Electromagnetic Induction Heating |
| |
| DOI： |
| 中文关键词: 实心轮胎；硫化；电磁感应加热；均匀性 |
| 英文关键词: solid tire;vulcanization;electromagnetic induction heating;uniformity |
| 基金项目: |
| 中图分类号:TQ336.1＋3;TQ330.6＋7 |
| Author Name | Affiliation | | LIU Fei | Beijing University of Chemical Technology；The National Engineering Laboratory of Tire Design and Manufacturing Process | | YANG Weimin | Beijing University of Chemical Technology；The National Engineering Laboratory of Tire Design and Manufacturing Process | | ZHANG Jinyun | Beijing University of Chemical Technology；The National Engineering Laboratory of Tire Design and Manufacturing Process | | JIAO Zhiwei | Beijing University of Chemical Technology；The National Engineering Laboratory of Tire Design and Manufacturing Process |
|
| Hits: 696 |
| Download times: 300 |
| 中文摘要: |
| 以某规格实心轮胎为例，采用电磁感应加热方法对实心轮胎进行硫化，通过调整感应线圈的排布方式及电磁加热参数对电磁感应加热方案进行优化。结果表明，采用优化后的电磁感应加热方案对轮胎进行硫化，整个硫化过程中轮胎周向和纵向温升一致，轮胎纵向硫化不均问题得到很大改善，纵向温差大幅减小，可控制在5 ℃范围内。 |
| 英文摘要: |
| In this paper,the application of electromagnetic induction heating method in solid tire vulcanization was investigated.The vulcanization process was optimized by adjusting the arrangement of induction coils and heating parameters.The experimental test results showed that,the tire temperature increase in both circumferential and longitudinal directions was the same,and the temperature difference in the longitudinal direction was greatly reduced showing a maximum difference of 5 ℃,which minimized the problem of nonuniform vulcanization. |
|
View Full Text
View/Add Comment Download reader |
| Close |
