文章摘要
本文二维码信息
二维码（扫一下试试看！）
带束层结构对高速轿车子午线轮胎印痕和制动性能的影响
Effect of Belt Structure on Footprints and Braking Performance of High Speed PCR Tire
  
DOI：
中文关键词: 轿车子午线轮胎；带束层结构；有限元分析；接地印痕；制动性能
英文关键词: PCR tire；belt stucture；FEA；footprints；braking performance
基金项目:
中图分类号:U463.341＋.4/.6
Author NameAffiliation
CHEN Yan-guo Beijing Research and Design Institute of Rubber Industry 
WU Gui-zhong Beijing Research and Design Institute of Rubber Industry 
Hits: 734
Download times: 41
中文摘要:
      利用MSC.Marc有限元软件模拟分析带束层结构对轿车子午线轮胎静态接地印痕、高速制动印痕和制动性能的影响，并将模拟结果与205/55R16 94W试制轮胎实测结果进行对比。结果表明:轮胎静态接地印痕的有限元模拟结果与实测结果接近，具有可靠指导意义；在相同的充气压力和负荷条件下，带束层宽度大的轮胎印痕短轴长度和印痕面积均大于带束层宽度小的轮胎，而印痕长轴长度较小，带束层钢丝帘线角度大的轮胎印痕短轴长度和印痕面积均大于带束层钢丝帘线角度小的轮胎，而印痕长轴长度较小，增大带束层宽度或钢丝帘线角度均能够增大轮胎印痕面积，通过改变带束层结构设计可以提高车辆安全性能；轮胎接地面积随着制动初始速度的提高而减小，导致轮胎接地压力增大，充气压力提高也会使轮胎接地面积减小，接地压力增大。
英文摘要:
      The effect of belt structure on static footprints，braking footprints and braking perfor-mance of PCR tire was simulated and analyzed by MSC.Marc finite element analysis(FEA) software，and the FEA simulated results were compared with the experimental results of 205/55R16 94W trial-manufactured tires.The results showed that，the FEA simulated results of static footprints of tires were in good accord with the experimental results，and were of great guiding significance.Under the same pneumatic pressure and load，the contact width and footprint area of tires with wider belts were greater than those with narrower belts，while the contact length of the former was smaller.The contact width and footprint area of tires with bigger belt steel cord angle were greater than those with smaller angle，while the contact length of the former was smaller.The footprint area could become larger by widening belt or increasing belt steel cord angle，and the vehicle safety could be improved by adjusting tire belt structure.Higher rolling speed or higher pneumatic pressure at braking led to smaller footprints and higher contact pressure.
View Full Text   View/Add Comment  Download reader
Close