|
二维码（扫一下试试看！） |
| 优化轮胎带束层角度改善胎面不规则磨耗的研究 |
| Study on optimization of belt angle to improve irregular tread wear |
| |
| DOI： |
| 中文关键词: 胎面磨耗;带束层角度;接地压力分布;无偏估计值;神经网络;二次线性规划法;三维有限元分析 |
| 英文关键词: tread wear; belt angle; ground-contact pressure distribution; unbiased estimator; neural network; sequence quadratic program; 3D FEM |
| 基金项目: |
| 中图分类号:TQ336.1 |
| Author Name | Affiliation | | YAO Wei | Haerbin University of Technology | | WANG You-shan | Hualin Tire Co., Ltd. | | TAN Huifeng | Haerbin University of Technology | | DU Xingwen | Haerbin University of Technology |
|
| Hits: 763 |
| Download times: 539 |
| 中文摘要: |
| 以接地面压力分布的无偏估计值作为衡量其均匀性的标准,采用二次线性规划法进行优化求解,并用三维有限元法对优化结果进行了验证。采用优化搜索带束角的轮胎的接地面压力分布的无偏估计值比原轮胎小,变化率达到1.08%,证明其接地面压力分布的均匀程度比原轮胎好,可改善胎面的不规则磨耗。 |
| 英文摘要: |
| The unbiased estimator of the ground-contact pressure distribution for a tire is taken as the criterion of its eveness,optimized with the sequence quadratic program (SQP)，and verified by 3D FEM.The unbiased estimator of the ground-contact pressure distribution for the tire with the optimized belt angle is smaller than that of the original tire and the change rate is about l.08%,which confirms that the ground-contact pressure distribution is more even and the irregular tread wear can be improved. |
|
View Full Text
View/Add Comment Download reader |
| Close |
