文章摘要
王庆念,于子涵,周鹏程,张则高.越野型265/65R18LT全钢轻型载重子午线轮胎的设计[J].轮胎工业,2024,44(2):0071-0074 本文二维码信息
二维码(扫一下试试看!)
越野型265/65R18LT全钢轻型载重子午线轮胎的设计
Design on 265/65R18LT All- steel Light Truck Radial Tire for Off-road
投稿时间:2023-04-28  修订日期:2023-04-28
DOI:10.12135/j.issn.1006-8171.2024.02.0071
中文关键词: 全钢轻型载重子午线轮胎  越野花纹  结构设计  施工设计  成品性能  有限元分析
英文关键词: all-steel light truck radial tire  off-road pattern  structurae design  construction design  performance of finished product  finite element analysis
基金项目:
中图分类号:
作者单位E-mail
王庆念* 三角轮胎股份有限公司 wangqingnian123@163.com 
于子涵 三角轮胎股份有限公司  
周鹏程 三角轮胎股份有限公司  
张则高 三角轮胎股份有限公司  
摘要点击次数: 276
全文下载次数: 226
中文摘要:
      介绍越野型265/65R18LT全钢轻型载重子午线轮胎的设计。结构设计:外直径 809 mm,断面宽 282 mm,行驶面宽度 210 mm,行驶面弧度高 11 mm,胎圈着合直径 459 mm,胎圈着合宽度 215.9 mm,断面水平轴位置(H/1/H/2) 0.972 9,胎面采用越野花纹,并预留镶钉位置,花纹深度 14 mm,花纹饱和度 55%,花纹周节数 40。施工设计:胎面采用胎冠胶和基部胶2层设计,1# 和2# 带束层采用3×0.2+6×0.35HT钢丝帘线,冠带层采用930dtex/2锦纶66浸胶帘布,胎体采用3+9×0.22+0.15钢丝帘线。成品性能试验结果表明,轮胎的充气外缘尺寸和各项性能均符合国家标准要求。轮胎接地印痕矩形率为1.01,肩部沉降为1.05,与有限元分析结果一致。
英文摘要:
      The design on 265/65R18LT all-steel light truck radial tire for off-road was introduced. In the structurae design,the following parameters were taken:overall diameter 809 mm,cross-section width 282 mm,width of running surface 210 mm,arc height of running surface 11 mm,bead diameter at rim 459 mm,bead width at rim 215.9 mm,maximum width position of cross-section(H/1/H/2) 0.972 9,off-road pattern for tread with reserved nail positions,pattern depth 14 mm,block/total ratio 55%,and number of pattern pitches 40. In the onstruction design,the following processes were taken:2-layer design of crown compound and base compound for tread,3× 0.2+6 × 0.35HT steel cord for 1# and 2# belt,930dtex/2 nylon 66 dipped cord for cap ply,3+9 × 0.22+0.15 steel cord for carcass.The performance test results of the finished product indicated that the inflated peripheral dimension and various performance of the tire met the requirements of national standards. The rectangular ratio of tire contact print was 1.01,and the shoulder settlement was 1.05,which was consistent with the finite element analysis results.
Author NameAffiliationE-mail
wangqingnian Triangle Tire Co.,Ltd wangqingnian123@163.com 
YU Zihan Triangle Tire Co.,Ltd  
ZHOU Pengcheng Triangle Tire Co.,Ltd  
ZHANG Zegao Triangle Tire Co.,Ltd  
查看全文   查看/发表评论  下载PDF阅读器
关闭