吴佳易.基于液压内胎硫化机的硫化飞边原因分析及控制措施[J].轮胎工业,2024,44(3):0176-0183 |
二维码(扫一下试试看!) |
基于液压内胎硫化机的硫化飞边原因分析及控制措施 |
Cause Analysis and Control Measures of Vulcanization Flash Based on Hydraulic Inner Tube Curing Press |
投稿时间:2023-03-07 修订日期:2023-03-07 |
DOI: |
中文关键词: 液压内胎硫化机 硫化飞边 模具 预热变形 |
英文关键词: hydraulic inner tube curing press vulcanization flash mold preheating deformation |
基金项目: |
中图分类号: |
|
摘要点击次数: 181 |
全文下载次数: 165 |
中文摘要: |
基于液压内胎硫化机的结构特点,分析造成内胎硫化飞边问题的原因,并提出相应的控制措施。通过采取准确计算硫化机合模力、检验新模具质量、控制模具预热变形、加强模具清洗和存放管理工作、将硫化机的空心热板更换为加厚的实心热板及将导向机构由工字型滚轮/铁板导轨更换为直线滑轨/滑块等措施,大幅降低了内胎硫化飞边出现的频率,为内胎硫化飞边问题提供设备检修流程的理论依据。 |
英文摘要: |
Based on the structural characteristics of the hydraulic inner tube curing press,the causes for the problem of vulcanization flash were analyzed,and corresponding control measures were proposed.By accurately calculating the clamping force of the vulcanization press,inspecting the quality of the new mold,controlling the preheating deformation of the mold,strengthening the cleaning and storage management of the mold,replacing the hollow hot plate of the vulcanization press with a thickened solid hot plate,and replacing the guide mechanism from I-shaped rollers/iron plate rails to linear slide rails/sliders,the frequency of inner tube vulcanization flash was significantly reduced,which could provide a theoretical basis for the equipment maintenance process of inner tube vulcanization flash issues. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |