| 成因贵,张福金.帘布厚度均匀性影响因素及解决方案研究[J].轮胎工业,2024,44(4):0236-0241 |
二维码（扫一下试试看！） |
| 帘布厚度均匀性影响因素及解决方案研究 |
| Research on Factors Influencing Uniformity of Cord Fabric Thickness and Solutions |
| 投稿时间：2022-12-08 修订日期：2022-12-08 |
| DOI： |
| 中文关键词: 帘布 厚度均匀性 压延辊筒 气泡刀 轴交叉 |
| 英文关键词: cord fabric thickness uniformity rolling roller bubble knife axis crossing |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 146 |
| 全文下载次数: 137 |
| 中文摘要: |
| 研究帘布厚度均匀性影响因素以及解决方案。结果表明：通过常规工艺参数优化（调整轴交叉值、预弯曲应力等）不能有效提高帘布厚度均匀性；帘布厚度均匀性呈“马鞍形”分布的根本原因是气泡刀行程叠加区域辊筒损伤变形，且更换辊筒是解决问题的根本方法；辊筒更换后，帘布厚度均匀性极差从0.20 mm降低至0.05 mm以下，可满足生产要求。 |
| 英文摘要: |
| The factors affecting the uniformity of cord fabric thickness and solutions were studied.The results showed that by optimizating conventional process parameters（such as adjusting axis crossing values and pre-bending stresses） couldn’t effectively increase unifornity of cord fabric thickness.The fundamental reason for the saddle shaped distribution of unifornity of cord fabric thickness was the damage and deformation of the roller in the overlapping area of the bubble knife stroke，and replacing the roller was the fundamental method to solve the problem.After replacing the roller，the range uniformity of cord fabric thickness decreased from 0.20 mm to below 0.05 mm，which could meet production requirements. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
