| 王婷婷,薛金堂,丛明辉.硫化钢圈夹具对全钢轮胎硫化胶囊使用寿命的影响[J].轮胎工业,2021,(1):0044-0048 |
二维码（扫一下试试看！） |
| 硫化钢圈夹具对全钢轮胎硫化胶囊使用寿命的影响 |
| all-steel tire；steel ring clamp；mechanical analysis；vulcanizing capsule；service life |
| 投稿时间：2019-12-19 修订日期：2019-12-19 |
| DOI：10.12135/j.issn.1006-8171.2020.12.0044 |
| 中文关键词: 全钢轮胎 钢圈夹具 力学分析 硫化胶囊 使用寿命 |
| 英文关键词: Simulated vulcanization, mechanicalSanalysis, curing bladder, service life. |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1316 |
| 全文下载次数: 897 |
| 中文摘要: |
| 通过力学仿真方法研究硫化钢圈夹具对全钢轮胎硫化胶囊使用寿命的影响。根据轮胎硫化过程中硫化胶囊的受力状态优化钢圈夹具与硫化胶囊的接触面形状后，硫化胶囊使用寿命延长15%～19%，因硫化胶囊裂口引起的废次品率降低50%，大大提升了轮胎外观质量，同时可减轻劳动强度。 |
| 英文摘要: |
| The influence of the vulcanizing steel ring clamp on the service life of the vulcanizing capsule for all-steel tire by mechanical simulation method was studied.After optimizing the shape of the contact surface between the steel ring clamp and the capsule according to the stress state of the vulcanizing capsule in the process of tire vulcanization，the service life of the vulcanizing capsule was prolonged by 15%～19%，and the rate of defective products caused by the crack of the capsule was reduced by 50%，which could greatly improve the appearance quality of the tire and reduce the labor intensity. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
