李剑波,王文博,杜孟成,李云峰,郭庆飞,赵振伟.核壳结构氧化锌在半钢子午线轮胎胎侧胶中的应用[J].轮胎工业,2022,42(2):0090-0093 |
 二维码(扫一下试试看!) |
核壳结构氧化锌在半钢子午线轮胎胎侧胶中的应用 |
Application of Core Shell Structure Zinc Oxide in Sidewall Compound of Steel-belted Radial Tire |
投稿时间:2021-02-18 修订日期:2021-02-18 |
DOI: |
中文关键词: 核壳结构氧化锌 硫化活性剂 半钢子午线轮胎 胎侧胶 成品性能 环保 胶料成本 |
英文关键词: core shell structure zinc oxide vulcanization active agent steel-belted radial tire sidewall compound finished tire performance environment protection compound cost |
基金项目: |
中图分类号: |
|
摘要点击次数: 1424 |
全文下载次数: 809 |
中文摘要: |
研究核壳结构氧化锌在半钢子午线轮胎胎侧胶中的应用。结果表明:核壳结构氧化锌具有锌含量低、反应活性高、堆积密度小等优点;在半钢子午线轮胎胎侧胶中以核壳结构氧化锌等量替代间接法氧化锌,胶料的硫化特性和物理性能相当,成品轮胎的耐久性能提高,胶料成本降低,同时可减小轮胎中锌含量。 |
英文摘要: |
The application of core shell structure zinc oxide in the sidewall compound of steel-belted radial tire was studied.The results showed that core shell structure zinc oxide had the advantages of low zinc content,high reaction activity and low bulk density.By using core shell structure zinc oxide equivalently instead of indirect zinc oxide in the sidewall compound of steel-belted radial tire,the vulcanization characteristics and physical properties of the compound were equivalent,the durability of the finished tire was improved,and the cost of the compound was reduced,meanwhile the zinc content in the tire was reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |