| 郭志强,张亚辉.380/85R28 R-1W农业子午线轮胎的有限元建模方法研究[J].轮胎工业,2026,46(6):0356-0359 |
二维码（扫一下试试看！） |
| 380/85R28 R-1W农业子午线轮胎的有限元建模方法研究 |
| Finite Element Modeling Method of 380/85R28 R-1W Agriculture Radial Tire |
| 投稿时间：2025-08-04 修订日期：2025-08-04 |
| DOI： |
| 中文关键词: 农业子午线轮胎 模型 有限元仿真 花纹 |
| 英文关键词: agriculture radial tire model finite element simulation pattern |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 209 |
| 全文下载次数: 73 |
| 中文摘要: |
| 以380/85R28 R-1W农业子午线轮胎为研究对象，介绍农业子午线轮胎的三维有限元建模方法，并通过试验对模型仿真精度进行验证。采用CAD软件进行材料分布设计、Hypermesh软件进行高质量网格划分，利用Abaqus软件建立轮胎三维有限元模型，充气工况试验验证了该模型具备较高的仿真精度。在此基础上，采用光面轮胎模型与花纹块模型组合的方式建立带花纹轮胎三维有限元模型，为轮胎接地印痕、静负荷等仿真计算提供了基础。 |
| 英文摘要: |
| Taking the 380/85R28 R-1W agriculture radial tire as the research object，the three-dimensional finite element modeling method of agriculture radial tires was introduced，and the accaracy of the model was verified by test.Using CAD software for material distribution design，Hypermesh software for high-quality mesh generation，the three-dimensional finite element model of agriculture radial tires was established by Abaqus software，and the simulation accuracy of the model was verified by inflation condition test.On this basis，the three-dimensional finite element model of patterned tires was established by combining a smooth tire model with a pattern block model，providing a foundation for simulation calculations such as tire ground contact patterns and static loads. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
