| 李 炜,周建伟,李子然.基于多层次组合模型技术的全钢载重子午线轮胎胎圈性能优化[J].轮胎工业,2025,(4):0202-0205 |
二维码（扫一下试试看！） |
| 基于多层次组合模型技术的全钢载重子午线轮胎胎圈性能优化 |
| Optimization of Bead Performance of Truck and Bus Radial Tires Based on Multi-level Combination Modeling Technique |
| 投稿时间：2024-07-08 修订日期：2024-07-08 |
| DOI： |
| 中文关键词: 全钢载重子午线轮胎 胎圈性能 组合模型技术 设计灵敏度分析 有限元方法 |
| 英文关键词: truck and bus radial tire bead performance combination modeling technique design sensitivity analysis finite element method |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 108 |
| 全文下载次数: 69 |
| 中文摘要: |
| 以12.00R20全钢载重子午线轮胎为研究对象，采用Abaqus/Standard软件建立了基于多层次组合模型技术的轮胎模型，并以胎圈部位胶料的材料参数C10为设计变量，额定工况下胎圈部位危险位置的正应力和正应变为目标函数进行设计灵敏度分析。结果表明，同时增大胎圈胶、耐磨胶、上三角胶和下三角胶的C10可以有效改善胎圈性能。 |
| 英文摘要: |
| Taking 12.00R20 truck and bus radial tire as the research object，a tire model based on multi-level combination modeling technique was established using Abaqus/Standard software.The material parameter C10 of compounds of tire bead was used as the design variable，and the normal stress and strain at the dangerous position of the bead under rated working conditions were used as the objective function for design sensitivity analysis.The results indicated that increasing C10 of the bead compound，wear-resistant compound，upper and lower apex compound simultaneously，could effectively improve the bead performance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
