| 姚海东,杨叶.1×1钢丝帘线的开发与性能探讨[J].轮胎工业,2024,44(6):0362-0366 |
二维码（扫一下试试看！） |
| 1×1钢丝帘线的开发与性能探讨 |
| Development and Performance Research of 1×1 Steel Cord |
| 投稿时间：2023-11-23 修订日期：2023-11-23 |
| DOI：10.12135/j.issn.1006-8171.2024.06.0362 |
| 中文关键词: 1×1钢丝帘线 轮胎 带束层 弯曲刚度 低负荷伸长率 |
| 英文关键词: 1×1 steel cord tire belt bending stiffness low load elongation |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 756 |
| 全文下载次数: 748 |
| 中文摘要: |
| 开发1×1钢丝帘线，并研究其性能。结果表明：采用校直器校直和加捻反扭两种工艺均可以得到符合设计要求的1×1钢丝帘线，校直器校直的钢丝帘线残余扭转更稳定，而加捻反扭的钢丝帘线直线性更好；在材料确定的情况下，1×1钢丝帘线的弯曲刚度和低负荷伸长率主要与直径相关，而与强度关系不大；在1 500 MPa试验压力下，1×0.30ST钢丝帘线的亨特疲劳性能比2×0.30ST钢丝帘线更好。 |
| 英文摘要: |
| 1×1 steel cord was developped and its performance was researched.The results showed that both straightening with a straightener and twisting and revers-twisting processes could achieve 1×1 steel cord that met the design requirements，and the residual torsion of the steel cord straightened by the straightener was more stable，while the straightness of the steel cord twisted and revers-twisted was better.With the material determined，the bending stiffness and low load elongation of 1×1 steel cord were mainly related to diameter，but less relation to strength.At 1500 MPa test pressure，Hunter fatigue performance of 1×0.30ST steel cord was better than that of 2 × 0.30ST steel cord. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
