| 孙宝余,孙佳佳,鲁强.胎圈着合宽度对7.00R16LT全钢轻型载重子午线轮胎性能的影响[J].轮胎工业,2023,43(10):0590-0593 |
二维码（扫一下试试看！） |
| 胎圈着合宽度对7.00R16LT全钢轻型载重子午线轮胎性能的影响 |
| Effect of Bead Width at Rim Seat on Performance of 7.00R16LT All-steel Light Truck and Bus Radial Tire |
| 投稿时间：2022-09-18 修订日期：2022-09-18 |
| DOI：10.12135/j.issn.1006-8171.2023.10.0590 |
| 中文关键词: 全钢轻型载重子午线轮胎 胎圈着合宽度 宽半寸设计 成品轮胎性能 装配性能 |
| 英文关键词: all-steel light truck and bus radial tire bead width at rim seat wider design by half inch finished tire performance assembly performance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 838 |
| 全文下载次数: 767 |
| 中文摘要: |
| 研究胎圈着合宽度对7.00R16LT全钢轻型载重子午线轮胎性能的影响。结果表明，与胎圈着合宽度采用标准轮辋宽度设计轮胎相比，着合宽度宽半寸设计轮胎在标准轮辋上装配后胎圈部位内收位移增大，胎圈部位与胎肩部位的应力分布得到平衡，胎肩部位接地压力分布得到较大改善，轮胎耐久性能提升了8%。 |
| 英文摘要: |
| The effect of bead width at rim seat on the performance of 7.00R16LT all-steel light truck and bus radial tire was studied.The results showed that compared with the tire designed with the standard rim width for the bead width at rim seat，the wider design tire by half-inch for the bead width at rim seat increased the retraction displacement of the bead after being assembled on the standard rim，balanced the stress distribution between the bead and the shoulder，the shoulder contact pressure distribution was greatly improved，and the tire durability increased by 8%. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
