| 魏云港,高 明,宋凌浩,许景刚.全钢载重子午线轮胎成型中定型过程的仿真研究[J].轮胎工业,2024,44(2):0105-0108 |
二维码（扫一下试试看！） |
| 全钢载重子午线轮胎成型中定型过程的仿真研究 |
| Simulation Study on Shaping Process in Building of All-steel Truck and Bus Radial Tire |
| 投稿时间：2022-08-25 修订日期：2022-08-25 |
| DOI：10.12135/j.issn.1006-8171.2024.02.0105 |
| 中文关键词: 全钢载重子午线轮胎 成型 定型 有限元仿真 |
| 英文关键词: all-steel truck and bus radial tire building shaping finite element simulation |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 988 |
| 全文下载次数: 819 |
| 中文摘要: |
| 以全钢载重子午线轮胎为例，对其成型中的定型过程进行了仿真研究。利用Abaqus软件复现了全钢载重子午线轮胎成型中的定型过程，通过与试验数据进行对比，验证了有限元仿真的准确性；通过定型因子影响分析，得到定型压力和超定型宽度的设定依据，有助于提高轮胎产品的均一性和胎坯品质，保障轮胎的动平衡和均匀性。 |
| 英文摘要: |
| Taking all-steel truck and bus radial tire as an example，simulation research was conducted on the shaping process during tire building.The building process of all-steel truck and bus radial tire was reproduced using Abaqus software，and the accuracy of finite element simulation was verified by comparing it with experimental data.By analyzing the influence of shaping factors，the basis for setting the shaping pressure and oversize width could be obtained，which helped to improve the uniformity of tires and the quality of green tire，ensuring the dynamic balance and uniformity of tires. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
