| 邱昌峰,陈仁全,王 君,周 磊,刘俊杰,苏国庆,孙 超.轮胎六分力试验机线性数据监控方法的研究[J].轮胎工业,2024,44(1):0003-0008 |
二维码（扫一下试试看！） |
| 轮胎六分力试验机线性数据监控方法的研究 |
| Study on Linear Data Monitoring Method for Tire Forces and Moments Testing Machine |
| 投稿时间：2022-08-15 修订日期：2022-08-15 |
| DOI：10.12135/j.issn.1006-8171.2024.01.0003 |
| 中文关键词: 光面轮胎 六分力试验机 数据监控 模拟路面 |
| 英文关键词: smooth tire forces and moments testing machine data monitoring simulated road surface |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1484 |
| 全文下载次数: 915 |
| 中文摘要: |
| 对轮胎六分力试验机线性数据的监控方法进行了研究。结果表明：在小侧偏角下，暖胎对轮胎侧向力系数（F1）和回正力矩系数（Ta1）的影响不大，采用F1和Ta1监控试验数据时可不用暖胎；采用控制轮胎监控F1和Ta1时，需要考虑轮胎制造工艺偏差、试验机偏差、充气压力偏差和负荷偏差的影响；在小侧偏角下，模拟路面的附着力系数对F1和Ta1的影响不大，在大侧偏角下，需要考虑模拟路面的附着力系数对F1和Ta1的影响；采用本监控方案，可对轮胎六分力试验机线性数据进行监控，判定试验数据的合理性。 |
| 英文摘要: |
| The monitoring method for linear data of tire forces and moments testing machine was studied.The results showed that under small side slip angles，the effect of warming tire on the lateral force coefficient（F1）and correction moment coefficient（Ta1） was not significant.When using F1 and Ta1 to monitor test data，warming tire was not necessary.When using control tires to monitor F1 and Ta1，it was necessary to consider the influence of tire manufacturing process deviation，testing machine deviation，inflation pressure deviation，and load deviation.Under small side slip angles，the adhesion coefficient of the simulated road surface had little effect on the F1 and Ta1.Under large side slip angles，it was necessary to consider the influence of the adhesion coefficient of the simulated road surface on F1 and Ta1.By using the monitoring scheme，the linear data of the tire forces and moments testing machine could be monitored to determine the rationality of the test data. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
