| 焦文秀,张 晔,常海岩,梁宇杰,张 华.4×0.225UT钢丝帘线在轿车轮胎带束层中的应用[J].轮胎工业,2023,43(5):0292-0295 |
二维码（扫一下试试看！） |
| 4×0.225UT钢丝帘线在轿车轮胎带束层中的应用 |
| Application of 4×0.225UT Steel Cord in Belt of Passenger Car Tire |
| 投稿时间：2022-07-18 修订日期：2022-07-18 |
| DOI：10.12135/j.issn.1006-8171.2023.05.0292 |
| 中文关键词: 钢丝帘线 轿车轮胎 带束层 轻量化 滚动阻力 成本 |
| 英文关键词: steel cord passenger car tire belt lightweight rolling resistance cost |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1410 |
| 全文下载次数: 758 |
| 中文摘要: |
| 研究4×0.225UT钢丝帘线在轿车轮胎带束层中的应用。结果表明：与3×0.30HT钢丝帘线相比，4×0.225UT钢丝帘线的直径和线密度减小，可有效减小帘布压延厚度和帘布单位面积质量；以4×0.225UT钢丝帘线替代3×0.30HT钢丝帘线生产215/65R15C轮胎，其充气外缘尺寸、强度和脱圈阻力变化不大，高速和耐久性能满足研发要求，单胎质量减小3.9%，滚动阻力降低3.7%，轮胎生产成本显著降低。 |
| 英文摘要: |
| The application of 4×0.225UT steel cord in the belt of passenger car tire was studied.The results showed that compared with 3×0.30HT steel cord，the diameter and linear density of 4×0.225UT steel cord were decreased，which could effectively reduce the calendering thickness and the mass per unit area of cord fabric.The 215/65R15C tire was produced by 4×0.225UT steel cord instead of 3×0.30HT steel cord，the inflated peripheral dimensions，strength and bead unseating resistance of the tire changed little，the high-speed and durability performance met the requirements of research and development.The single tire mass was decreased by 3.9%，the rolling resistance was reduced by 3.7%，and the tire production cost was significantly reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
