文章摘要
王传志,刘连波,王天石,张杰,许冰.新型钢丝帘线在全钢轻型载重子午线轮胎轻量化设计中的应用[J].轮胎工业,2022,42(6):0361-0365 本文二维码信息
二维码(扫一下试试看!)
新型钢丝帘线在全钢轻型载重子午线轮胎轻量化设计中的应用
Application of New Steel Cords in Lightweight Design of All-steel Light Truck and Bus Radial Tire
投稿时间:2021-08-27  修订日期:2021-08-27
DOI:
中文关键词: 钢丝帘线  全钢轻型载重子午线轮胎  带束层  胎体  轻量化  成品性能  生产成本
英文关键词: steel cord  all-steel light truck and bus radial  belt  carcass  lightweight  finished tire performance  production cost
基金项目:
中图分类号:
作者单位E-mail
王传志* 青岛双星轮胎工业有限公司 azxm2008@163.co 
刘连波 青岛双星轮胎工业有限公司  
王天石 青岛双星轮胎工业有限公司  
张杰 青岛双星轮胎工业有限公司  
许冰 青岛双星轮胎工业有限公司  
摘要点击次数: 829
全文下载次数: 442
中文摘要:
      研究3种新型钢丝帘线在全钢轻型载重子午线轮胎轻量化设计中的应用。结果表明,采用新型钢丝帘线4+3×0.33ST,3+8×0.22ST和3×7×0.175HE分别替代传统钢丝帘线3×0.20+6×0.35HT,3+9×0.22HT+0.15和3×7×0.20HE用于7.50R16LT全钢轻型载重子午线轮胎的带束层、胎体和0°带束层中,轮胎的强度、高速性能和耐久性能均满足国家标准要求,且轮胎质量减小,生产成本降低。
英文摘要:
      The application of three new steel cords in the lightweight design of all-steel light truck and bus radial tire was studied.The results showed that the new steel cord 4+3×0.33ST,3+8×0.22ST and 3×7× 0.175HT instead of traditional steel cord 3×0.20+6×0.35HT,3+9×0.22HT+0.15 and 3×7×0.20HE respectively in the belt,carcass and 0° belt of 7.50R16LT all-steel light truck and bus radial tire,the strength,high-speed performance and durability of the tire met the requirements of national standards,the tire weight was decreased and production cost was reduced.
Author NameAffiliationE-mail
a a azxm2008@163.co 
 a  
 a  
 a  
 a  
查看全文   查看/发表评论  下载PDF阅读器
关闭