| 杨振环,徐伟,吴群华.全钢载重子午线轮胎胎圈周向裂痕产生原因及解决措施[J].轮胎工业,2021,(12):0774-0776 |
二维码（扫一下试试看！） |
| 全钢载重子午线轮胎胎圈周向裂痕产生原因及解决措施 |
| Root Causes Analysis of Circumferential Cracks in Bead of Truck and Bus Radial Tire and Corrective Solution |
| 投稿时间：2021-02-19 修订日期：2021-02-19 |
| DOI： |
| 中文关键词: 全钢载重子午线轮胎 胎圈 周向裂痕 胶料分布 工艺控制 隔离剂 |
| 英文关键词: truck and bus radial tire bead circumferential crack rubber distribution process control release agent |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 578 |
| 全文下载次数: 681 |
| 中文摘要: |
| 分析全钢载重子午线轮胎胎圈周向裂痕的产生原因并提出相应解决措施。结果表明，胎圈周向裂痕产生的本质为胎圈部位胶料位移过大，通过胎圈部位胶料分布的精准设计、控制生产过程中胎圈形状的圆润、改善耐磨胶的流动性、控制胶囊隔离剂的用量与涂刷频率、加强现场的工艺控制，可以使胎圈周向裂痕问题得到有效解决。 |
| 英文摘要: |
| The causes of circumferential cracks in the bead of truck and bus radial tire was analyzed and proposed corresponding solutions.The results showed that the root cause of the circumferential cracks in the bead was the excessive displacement of the compound at the bead.Through the precise design of the compound distribution at the bead，controlling the roundness of the bead shape during the production process，improving the fluidity of the wear-resistant compound，controlling the amount and frequency of the release agent for vulcanization capsule and strengthening on-site process control could effectively solve the problem of circumferential cracks in the bead. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
