| 陈学春,周洁,汤建忠,王威.钢丝湿式拉拔配模工艺对能耗的影响研究[J].轮胎工业,2021,(12):0767-0770 |
二维码（扫一下试试看！） |
| 钢丝湿式拉拔配模工艺对能耗的影响研究 |
| Influence of Die Matching Process on Energy Consumption in Wet Drawing of Steel Wire |
| 投稿时间：2021-01-29 修订日期：2021-01-29 |
| DOI： |
| 中文关键词: 钢丝 湿式拉拔 配模工艺 压缩率 能耗 |
| 英文关键词: steel wire wet drawing mold process compression ratio energy consumption |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 539 |
| 全文下载次数: 565 |
| 中文摘要: |
| 利用有限元模拟分析研究湿式拉拔配模工艺对能耗的影响。结果表明：试验与理论模拟分析结果比较吻合，在钢丝多道次拉拔过程中，随着道次的增加，模拟分析结果显示，拉拔力整体呈下降的趋势；试验结果表明，单位产品能耗随之下降，能源利用效率提高。 |
| 英文摘要: |
| The influence of wet drawing die matching process on energy consumption was studied by finite element simulation analysis.The results showed that the test results were in good agreement with the theoretical simulation analysis results.In the multi pass drawing process of steel wire，the simulation analysis results showed that the drawing force decreases as the number of passes increases.The test results showed that the energy consumption per unit product decreased and the energy utilization efficiency improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
