文章摘要
李永强,刘从臻,李亚龙,孙运芬.花纹块刚度对轮胎抓着性能影响的研究[J].轮胎工业,2020,40(9):0533-0537 本文二维码信息
二维码(扫一下试试看!)
花纹块刚度对轮胎抓着性能影响的研究
Influence of Pattern Block Stiffness on Tire Grip Performance
投稿时间:2020-03-07  修订日期:2020-03-07
DOI:10.12135/j.issn.1006-8171.2020.09.0533
中文关键词: 子午线轮胎  花纹块  刚度  正交试验  抓着性能  有限元分析
英文关键词: radial tire  pattern block  stiffness  orthogonal test  grip performance  finite element analysis
基金项目:国家自然科学基金资助项目(51875327);山东省自然科学基金资助项目(ZR2018LE010)
中图分类号:
作者单位E-mail
李永强 山东理工大学 1450309369@qq.com 
刘从臻 山东理工大学 lcz200811@163.com 
李亚龙 山东理工大学  
孙运芬 山东理工大学  
摘要点击次数: 123
全文下载次数: 27
中文摘要:
      以205/55R16子午线轮胎为例,利用Hypermesh和Abaqus有限元分析软件建立模型,以单个花纹块为研究对象,选取行驶方向摩擦力作为纵向抓着性能的评价指标,通过正交试验分析花纹结构参数对其抓着性能的影响,并结合花纹块刚度分析结果对轮胎整体接地区域进行分析。结果表明:在不改变接地轮廓曲线和胎面胶参数的前提下,花纹块横沟侧壁角度对花纹块刚度和纵向抓着性能影响最大,纵沟侧壁角度和横沟深度的影响依次减小;随着花纹块横沟侧壁角度的减小,花纹块刚度降低,轮胎抓着力增大,可为提升轮胎抓着性能设计提供参考。
英文摘要:
      The longitudinal grip of the tire determines the driving and braking performance of the vehicle, and the tread stiffness directly affects the grip performance of the tire. In this paper, taking 205/55R16 radial tire as an example, Hypermesh and Abaqus are used to build the model, and the correctness of the model is verified by ground pressure test. Taking a single pattern block as the research object, the friction force in the driving direction is selected as the evaluation index of the longitudinal grip performance, and the influence of pattern structure parameters on the grip performance is analyzed through orthogonal experiments. Based on the analysis results of block stiffness, the overall grounding area of the tire is analyzed to verify the correctness of the orthogonal test conclusion. The results show that the lateral groove angle of the block has the greatest influence on the longitudinal grip performance and stiffness of the tire, Taking 205/55R16 radial tire as an example,using Hypermesh and Abaqus finite element analysis software to establish the models,taking a single pattern block as the research object,selecting the friction in the driving direction as the evaluation index of the longitudinal grip performance,the influence of pattern structure parameters on its grip performance was analyzed through orthogonal test,and combining with the results of pattern block stiffness analysis,the overall contact area of tire was analyzed.The results showed that under the premise of unchanging the grounding profile curve and tread compound parameters,the side wall angle of the transverse groove of the pattern block had the greatest influence on the stiffness and longitudinal grip performance of the pattern block,and that of the side wall angle of the longitudinal groove and the depth of the transverse groove decreased in turn.As the side wall angle of the transverse groove of the pattern block decreased,the stiffness of the pattern block decreased,and the grip force of the tire increased,which could provide a reference for improving the grip performance design of the tire.
Author NameAffiliationE-mail
LI Yongqiang Shandong University of Technology 1450309369@qq.com 
LIU Congzhen Shandong University of Technology lcz200811@163.com 
LI Yalong Shandong University of Technology  
SUN Yunfen Shandong University of Technology  
查看全文   查看/发表评论  下载PDF阅读器
关闭