文章摘要
罗行,吴健,陈达,粟本龙,王友善,李哲.不同负荷下锦纶帘线失效行为试验与仿真研究[J].轮胎工业,2020,40(12):0718-0721 本文二维码信息
二维码(扫一下试试看!)
不同负荷下锦纶帘线失效行为试验与仿真研究
Experimental and Simulation Research on Failure Behavior of Nylon Cord under Different Loads
投稿时间:2020-02-25  修订日期:2020-02-25
DOI:10.12135/j.issn.1006-8171.2020.12.0718
中文关键词: 锦纶帘线  仿真模型  负荷  失效行为  几何特征  断裂
英文关键词: nylon cord  simulation model  load  failure behavior  geometric feature  fracture
基金项目:国家自然科学基金重大项目课题(51790502);山东省自然科学基金资助项目(ZR2018QEE004);山东省重点研发计划项目(2019GGX102051);威海科技计划资助项目(2017DXGJ011)
中图分类号:
作者单位E-mail
罗行 哈尔滨工业大学(威海)橡胶复合材料与结构研究所 luohanghit@163.com 
吴健* 哈尔滨工业大学威海橡胶复合材料与结构研究所 威海 264209 wu1234jian5678@163.com 
陈达 哈尔滨工业大学威海橡胶复合材料与结构研究所 威海 264209  
粟本龙 哈尔滨工业大学威海橡胶复合材料与结构研究所 威海 264209  
王友善 哈尔滨工业大学威海橡胶复合材料与结构研究所 威海 264209  
李哲 哈尔滨工业大学威海橡胶复合材料与结构研究所 威海 264209  
摘要点击次数: 592
全文下载次数: 459
中文摘要:
      建立了锦纶帘线的有限元模型,并通过仿真和试验研究不同负荷下锦纶帘线的失效行为。结果表明:随着负荷的增大,锦纶帘线的捻距增大,捻径减小,捻角也相应减小;锦纶帘线各相关参数变化呈非线性,仿真值与试验结果吻合;由于断裂时两股单线受力不均,帘线断裂处呈绒毛状断口,拉伸速率和环境温度对其断口形态具有显著影响。
英文摘要:
      The finite element model of nylon cord wass established,and the failure behavior of nylon cord under different loads was investigated by simulation and experiment.The results showed that,with the increase of load,the twist length of the cord increased,the twist diameter decreased and the twist angle decreased accordingly.The parameters of nylon cord were non-linear and the simulation results were consistent with the test results.Because of the uneven stress of the two strands,the fracture of cord was fluffy,and the tensile rate and ambient temperature had a significant impact on the fracture morphology.
Author NameAffiliationE-mail
Luo hang Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai luohanghit@163.com 
Wu jian Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai wu1234jian5678@163.com 
Chen da Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai  
Su benlong Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai  
Wang youshan Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai  
Li zhe Center for Rubber Composite Materials, Harbin Institute of Technology, Weihai  
查看全文   查看/发表评论  下载PDF阅读器
关闭