| 付新华,李宁,郭渊浩,李鹏.橡胶超弹性测试及其对轮胎有限元计算结果的影响[J].轮胎工业,2020,40(1):0056-0061 |
二维码（扫一下试试看！） |
| 橡胶超弹性测试及其对轮胎有限元计算结果的影响 |
| Rubber Superelasticity Test and Its Influence on Tire Finite Element Calculation Results |
| 投稿时间：2018-11-12 修订日期：2018-11-12 |
| DOI： |
| 中文关键词: 橡胶 轮胎 超弹性 单轴拉伸 等双轴拉伸 平面拉伸 本构模型 有限元仿真 |
| 英文关键词: rubber tire superelasticity uniaxial tension equiaxed biaxial tension plane tension constitutive model finite element simulation |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1631 |
| 全文下载次数: 1052 |
| 中文摘要: |
| 选取某规格全钢子午线轮胎胶料分别进行单轴拉伸、等双轴拉伸和平面拉伸不同变形模式测试，分析比较不同变形模式组合时Yeoh，Ogden和Van der Waals等本构模型的拟合精度，并以同规格轮胎为例对比不同变形模式下本构模型的仿真精度。结果表明，当仅有单轴拉伸数据时适宜选择Yeoh模型，而用3种变形模式能够更好地表征胶料在工作状态时的变形状态。 |
| 英文摘要: |
| The different deformation modes of uniaxial tension，biaxial tension and plane tension were tested for a certain specification of all-steel radial tire compound.The fitting accuracy of Yeoh，Ogden and Van der Waals constitutive models under different deformation modes was analyzed and compared，and the simulation accuracy of the constitutive models under different deformation modes were compared with those of the same specification tire.The results showed that Yeoh model was more suitable when only uniaxial tension data were available，and the three deformation modes could better characterize the deformation state of the compound in the working state. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
