| 王中江,郑涛,李民军,赵政,李海艳.SSM一步法炼胶工艺对胎面气孔率的影响[J].轮胎工业,2017,37(1):40-43 |
二维码（扫一下试试看！） |
| SSM一步法炼胶工艺对胎面气孔率的影响 |
| Effect of SSM One-step Mixing Process on Porosity of Tread |
| |
| DOI： |
| 中文关键词: 半钢子午线轮胎 胎面 一步法炼胶 气孔率 炭黑分散度 |
| 英文关键词: steel-belted radial tire tread one-step mixing porosity carbon black dispersion |
| 基金项目: |
| 中图分类号:U463.341＋.4/.6；TQ330.6＋3 |
|
| 摘要点击次数: 951 |
| 全文下载次数: 788 |
| 中文摘要: |
| 试验研究SSM一步法炼胶工艺对半钢子午线轮胎胎面气孔率的影响。结果表明，与传统胎面四段炼胶工艺相比，SSM一步法炼胶工艺生产的胎面胶料的炭黑分散度等级和分散性指数均较高，胶料的流动性提高，物理性能提升，可降低挤出胎面的断面气孔率，最终提升成品轮胎的胎面稳定性、外观质量及耐磨性能。 |
| 英文摘要: |
| The effect of SSM one-step mixing process on the porosity in tire tread of steel-belted radial tire was experimentally investigated.The results showed that，compared with conventional four-step mixing process，the carbon black dispersion status and dispersion index of the tread compound with SSM one-step mixing process were higher，the flowability of the compound and the physical properties of the vulcanizates increased，the porosity of tread cross-section was reduced，and the tread stability，appearance quality and wear resistance of the finished tire were improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
