| 李晓辉,李红卫,张晓鹏,李亚东,葛超.轮胎脱圈阻力试验有限元仿真分析[J].轮胎工业,2019,39(1):0058-0061 |
二维码（扫一下试试看！） |
| 轮胎脱圈阻力试验有限元仿真分析 |
| Finite Element Simulation Analysis on Tire Unseating Test |
| 投稿时间：2017-06-28 修订日期：2017-06-28 |
| DOI：10.12135/j.issn.1006-8171.2019.01.0058 |
| 中文关键词: 轮胎 脱圈阻力试验 有限元分析 |
| 英文关键词: tire unseating test finite element analysis |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1567 |
| 全文下载次数: 557 |
| 中文摘要: |
| 以245/30R22半钢子午线轮胎为研究对象，利用Abaqus软件对轮胎进行脱圈阻力试验仿真分析，不仅给出了一套基于Abaqus软件的轮胎脱圈阻力试验的模拟方法，而且提出了轮胎脱圈难易程度的评价方法。结果表明，仿真获得的脱圈阻力与试验结果吻合较好，可以对轮胎的防脱圈性能进行提前预报。 |
| 英文摘要: |
| Taking 245/30R22 steel-belted radial tire as researching object，tire unseating test simulation based on Abaqus software was carried out，and the solution and evaluation method of tire unseating test simulation based on Abaqus software were presented.The results showed that the unseating resistant obtained by simulation was in good agreement with the experimental result，which could be used to the early prediction on tire unseating resistance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
