| 何跃,王彩红,裴权华,郭明明.600/55R26.5全钢农业子午线轮胎的设计[J].轮胎工业,2018,38(3): |
|
| 600/55R26.5全钢农业子午线轮胎的设计 |
| Design of 600/55R26.5 All Steel Agriculture Radial Tire |
| 投稿时间：2017-01-19 修订日期：2017-01-19 |
| DOI： |
| 中文关键词: 全钢农业子午线轮胎,结构设计,施工设计 |
| 英文关键词: agriculture radial tire structure design construction design |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1326 |
| 全文下载次数: 489 |
| 中文摘要: |
| 介绍600/55R26.5全钢农业子午线轮胎的设计。结构设计：外直径1328mm,断面宽608mm,行驶面宽度569mm,行驶面弧高22mm,胎圈着合直径671mm,胎圈着合宽度520.7mm,轮胎水平轴位置(H1/H2)0.9302,花纹深度19mm,花纹块占比达到53.3%,花纹截距数为36,采用特殊的胎圈轮辋保护结构设计。施工设计：胎体采用1层3+9*0.22+0.15钢丝帘布层,帘线密度为60根/1dm,带束层采用了2层3+9+15*0.22+0.15的钢丝帘布层,帘线密度为45根/1dm,采用全钢工程子午线轮胎一次法成型机成型,蒸锅式硫化机硫化。成品性能试验结果表面,轮胎的充气外缘尺寸和物理性能均符合相应设计和标准要求。 |
| 英文摘要: |
| The design of 600/55R26.5 agriculture radial tire was described. In the structure design, the following parameters were taken: overall diameter 1328mm, cross-sectional width 608mm, width of running surface 569mm, height of running surface 22mm, bead diameter at rim seat 671mm, bead width at rim seat 520.7mm, maximum width position of cross-section(H1/H2) 0.9302, pattern depth 19mm,block /total 53.3%, number of pattern pitch 36, special bead rim protection structure design. In the construction design,the following processes were taken: 1 layer of 3+9*0.22+0.15 steel cord was used in carcass ply, its cord density was 60/1dm, 3+9+15*0.22+0.15 steel cord was applied for 2 layers of belt, ,its cord density was 45/1dm, The tires were built on all steel engineering radial tire building machine, and cured in Steamer type vulcanizing machine. It was confirmed by the tests of the finished tire that, the peripheral dimension and physical properties met the requirements of relative design and standard. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
