| 王伟,于雅琳,李卫国,陈建军.碳纳米管在白炭黑补强半钢子午线轮胎胎面胶中的应用[J].轮胎工业,2016,36(7):419-423 |
二维码（扫一下试试看！） |
| 碳纳米管在白炭黑补强半钢子午线轮胎胎面胶中的应用 |
| Application of Carbon Nanotubes in the Silica Reinforced Tread Compound of Radial Steel-belted Tire |
| |
| DOI： |
| 中文关键词: 碳纳米管 白炭黑 半钢子午线轮胎 胎面胶 电阻率 |
| 英文关键词: carbon nanotube silica radial steel-belted tire tread compound resistivity |
| 基金项目: |
| 中图分类号:TQ336.1；TQ330.38+3 |
|
| 摘要点击次数: 1207 |
| 全文下载次数: 489 |
| 中文摘要: |
| 研究碳纳米管在白炭黑半钢子午线轮胎胎面胶中的应用。结果表明：加入碳纳米管后，胶料的门尼粘度、硫化速率、邵尔A型硬度、100%定伸应力、拉伸强度和撕裂强度增大，耐磨性能提高；碳纳米管用量为4份时，胶料的电阻率大幅减小，抗湿滑性能提高，成品轮胎的耐久和高速性能达到国家标准要求。 |
| 英文摘要: |
| Application of carbon nanotubes in the silica reinforced tread compound of radial steel-belted tire was investigated.The results showed that，by adding carbon nanotubes，the Mooney viscosity，vulcanization rate，Shore A hardness，the modulus at 100% elongation，tensile strength and tear strength of the compound were increased，and the wear resistance was improved.When the addition level of carbon nanotubes was 4 phr，the resistivity of the compound was decreased significantly，the wet skid resistance was improved，the endurance performance and high speed performance of the finished tire reached the requirements of national standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
