| 赵成忠,李培军,崔莉,周萍.全钢载重子午线轮胎成型工艺对轮胎径向力波动的影响[J].轮胎工业,2017,37(7): |
|
| 全钢载重子午线轮胎成型工艺对轮胎径向力波动的影响 |
| The effect of the tire forming process of all steel radial truck tire on the radial force vibration |
| 投稿时间：2015-10-07 修订日期：2015-10-07 |
| DOI： |
| 中文关键词: 子午线轮胎,成型工艺,均匀性,径向力波动 |
| 英文关键词: radial truck tire forming process uniformity radial force vibration |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1113 |
| 全文下载次数: 0 |
| 中文摘要: |
| 研究了成型工艺参数变化对子午线轮胎径向力波动(RFV)的影响。实验结果表明,胎面接头位于胎面传递环上方、成型半部件接头定位角度均匀分布、胎面长度减短10mm、胎面传递环瓦块尺寸与胎胚直径差异较小、在确保能夹紧胎面复合件的情况下胎面传递环瓦块夹持压力的降低,均有利于减小轮胎的RFV,提高轮胎的均匀性。 |
| 英文摘要: |
| The influence of the forming process parameters variation on the radial force vibration of radial truck tire was studied in this paper. Results showed that the uniformity of tire was enhanced because those methods were adopt in this paper，which can reduce the radial force vibration of tire, for instance, the tire surface joint is lies on the above of transfer ring of tread, the higher uniform distribution of orientation angle of building half component joint is, the length of tread is cut by 10mm, the little difference between the pad size of tread transfer ring and the diameter of tire, and the reduce of the pad clamping pressure of tread transfer ring. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
