| 张帆,王柱庆.纳米氧化锌在斜交轮胎胎面胶中的应用[J].轮胎工业,2014,34(7):427-429 |
二维码（扫一下试试看！） |
| 纳米氧化锌在斜交轮胎胎面胶中的应用 |
| Application of Nano Zinc Oxide in Tread Compound of Bias Tire |
| |
| DOI： |
| 中文关键词: 纳米氧化锌 斜交轮胎 胎面胶 抗硫化返原性 |
| 英文关键词: nano zinc oxide bias tire tread compound anti-reversion characteristic |
| 基金项目: |
| 中图分类号:TQ330.38+5；U463.341+.3 |
|
| 摘要点击次数: 872 |
| 全文下载次数: 276 |
| 中文摘要: |
| 研究纳米氧化锌在斜交轮胎胎面胶中的应用。结果表明：在胎面胶中以纳米氧化锌减量25%替代普通氧化锌，胶料的t10和t90延长，抗硫化返原性明显提高；硫化胶的邵尔A型硬度、300%定伸应力和拉伸强度增大，耐磨性能略有提高，压缩生热降低；成品轮胎的耐久性能提高，且生产成本降低。 |
| 英文摘要: |
| The application of nano zinc oxide in the tread compound of bias tire was investigated.The results showed that，by using nano zinc oxide in the tread compound at the addition level which was 25% less than the addition level of common zinc oxide，the t10 and t90 of the compound extended，and the anti-reversion characteristic increased significantly.The Shore A hardness，modulus at 300% elongation and tensile strength of the vulcanizate increased，the wear resistance increased slightly，and the compression heat build-up decreased.The endurance of the finished tire was improved，and the production cost was reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
