| 王孝涛,张春革,李振波,韩志田.445/65R22.5 20PR全钢载重子午线轮胎的设计[J].轮胎工业,2014,34(5):277-280 |
二维码（扫一下试试看！） |
| 445/65R22.5 20PR全钢载重子午线轮胎的设计 |
| Design of 445/65R22.5 20PR Truck and Bus Radial Tire |
| |
| DOI： |
| 中文关键词: 全钢载重子午线轮胎 结构设计 施工设计 |
| 英文关键词: truck and bus radial tire structure design construction design |
| 基金项目: |
| 中图分类号:U463.341+.3/.6 |
|
| 摘要点击次数: 1089 |
| 全文下载次数: 456 |
| 中文摘要: |
| 介绍445/65R22.5 20PR全钢载重子午线轮胎的设计。结构设计：外直径 1 153 mm，断面宽 454 mm，行驶面宽度 350 mm，行驶面弧度高 17 mm，胎圈着合直径 569.5 mm，胎圈着合宽度 356 mm，断面水平轴位置（H1/H2） 1.008 6，采用3条纵向主花纹沟设计，花纹深度 20 mm，花纹周节数 38，花纹饱和度 77.61%。施工设计：胎体采用0.25+（6+12）×0.225HT钢丝帘线，1#和2#带束层采用3+6×0.35HT钢丝帘线，3#带束层采用5×0.30HI钢丝帘线，0°带束层采用3×7×0.20HE钢丝帘线；采用一次法成型机成型，B型双模定型硫化机硫化。成品性能试验结果表明，成品轮胎充气外缘尺寸、强度性能和耐久性能符合相应设计和国家标准要求，胎圈耐久性能符合企业标准要求。 |
| 英文摘要: |
| The design of 445/65R22.5 20PR truck and bus radial tire was described.In the structure design，the following parameters were taken：overall diameter 1 153 mm，cross-sectional width 454 mm，width of running surface 350 mm，height of running surface 17 mm，bead diameter at rim seat 569.5 mm，bead width at rim seat 356 mm，maximum width position of cross-section （H1/H2） 1.008 6，3 longitudinal pattern grooves，pattern depth 20 mm，total number of pitches 38，and block/total ratio 77.61%.In the construction design，the following processes were taken：0.25+（6+12）×0.225HT steel cord for carcass ply，3+6×0.35HT steel cord for 1# and 2# belt ply，5×0.30HI steel cord for 3#belt ply，3×7×0.20HE steel cord for 0° belt ply；using single stage building machine to build tires，and using B-type curing press to cure tires.It was confirmed by the tests of finished tires that the inflated peripheral dimension，strength performance and endurance performance met the requirements of relative design and national standard，and the bead endurance performance met the requirements of enterprise standard. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
