| 仝慧娟,杜正华,吴晓卫,周建美.应用硫化仪变温硫化模拟实现对轮胎硫化时间的调整[J].轮胎工业,2011,(4):236-241 |
二维码（扫一下试试看！） |
| 应用硫化仪变温硫化模拟实现对轮胎硫化时间的调整 |
| Adjustment on Tire Curing Time by Simulation of Varying Temperature Vulcanization Using Rheometer |
| |
| DOI： |
| 中文关键词: 硫化仪 轮胎 变温硫化模拟 硫化程度 硫化时间 |
| 英文关键词: rheometer tire varying temperature vulcanization simulation vulcanization level curing time |
| 基金项目: |
| 中图分类号:TQ330.6＋7；U463.341＋.6 |
|
| 摘要点击次数: 750 |
| 全文下载次数: 21 |
| 中文摘要: |
| 采用多功能硫化仪模拟轮胎硫化过程，并对轮胎硫化工艺进行优化。试验结果表明：模拟硫化温度曲线与实际测得的温度曲线基本吻合；在现有硫化时间（54 min）下，下三角胶和胎面胶达到正硫化点，而内衬层胶和带束层胶稍有过硫；适当缩短硫化时间（52 min），内衬层胶和带束层胶的过硫现象改善，轮胎达到良好的硫化程度。 |
| 英文摘要: |
| The vulcanization of tire was simulated by using multifunctional rheometer，and the curing process was optimized.The test results showed that，the curing temperature curve of simulation matched with the practical curing temperature curve；with current curing time （54 min），the vulcanization level of the apex and tread compound was in the optimum cure domain，but the innerliner and belt compound were overcured slightly；by reducing the curing time （to 52 min） properly，the overcured level of the innerliner and belt compound was reduced，and the vulcanization level of the tire was proper. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
