文章摘要
翟俊学,李刚臣,单领弟,赵树高.混炼工艺对炭黑/NR胶料性能的影响[J].轮胎工业,2011,(3):169-179 本文二维码信息
二维码（扫一下试试看！）
混炼工艺对炭黑/NR胶料性能的影响
Effect of Mixing Technology on the Properties of Carbon Black/NR Compound
  
DOI：
中文关键词: 混炼工艺  炭黑  NR  分散  物理性能  动态力学性能
英文关键词: mixing technology  carbon black  NR  dispersion  physical property  dynamic property
基金项目:
中图分类号:TQ330.1＋1；TQ332.1＋2；TQ330.38＋1
作者单位
翟俊学 青岛科技大学橡塑材料与工程教育部重点实验室；青岛科技大学山东省橡塑材料与工程重点实验室 
李刚臣 青岛科技大学橡塑材料与工程教育部重点实验室；青岛科技大学山东省橡塑材料与工程重点实验室 
单领弟 青岛科技大学橡塑材料与工程教育部重点实验室；青岛科技大学山东省橡塑材料与工程重点实验室 
赵树高 青岛科技大学橡塑材料与工程教育部重点实验室；青岛科技大学山东省橡塑材料与工程重点实验室 
摘要点击次数: 777
全文下载次数: 20
中文摘要:
      研究混炼工艺对炭黑在NR中的分散性及其硫化胶性能的影响。结果表明：提高填充因数、转子转速和起始温度，胶料转矩和能量消耗增大，升温速率和排胶温度升高，混炼时间缩短；选择适中的填充因数和混炼时间，提高转子转速、起始温度和采用分段降速混炼均有利于提高炭黑的分散性；当炭黑分散性较好时，炭黑/NR硫化胶的物理性能、动态力学性能和耐磨性能提高，压缩生热降低。
英文摘要:
      The effects of mixing technology on the dispersion of carbon black in NR and the properties of carbon black/NR vulcanizate were investigated.The results showed that，with the increase of filling volume factor，rotor rotational speed and initial mixing temperature，the torque and energy consumption of compound increased，temperature raising speed and discharging temperature also increased，and the mixing time was shortened.Suitable filling volume factor and mixing time，higher rotor rotational speed and initial temperature，and multi step mixing with gradually decreased speed could increase the dispersion of carbon black.As the dispersion of carbon black was improved，the physical property，dynamic property and abrasion property of vulcanizates increased，and compression heat build-up decreased.
Author NameAffiliation
ZHAI Jun-xue Qingdao University of Science and Technology 
LI Gang-chen Qingdao University of Science and Technology 
SHAN Ling-di Qingdao University of Science and Technology 
ZHAO Shu-gao Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭