文章摘要
汪传生,姜永典,边慧光.1×2×0.30SHT钢丝帘线在轿车子午线轮胎带束层中的应用[J].轮胎工业,2010,(1):39-41 本文二维码信息
二维码（扫一下试试看！）
1×2×0.30SHT钢丝帘线在轿车子午线轮胎带束层中的应用
Application of 1×2×0.30SHT steel cord in belt of PCR tire
  
DOI：
中文关键词: 轿车子午线轮胎  钢丝帘线  带束层
英文关键词: PCR tire  steel cord  belt
基金项目:
中图分类号:TQ330.38+9；U463.341+.4/.6
作者单位
汪传生 青岛科技大学 机电工程学院 
姜永典 青岛科技大学 机电工程学院；江苏韩泰轮胎有限公司 
边慧光 青岛科技大学 机电工程学院 
摘要点击次数: 1061
全文下载次数: 13
中文摘要:
      研究1×2×0.30SHT钢丝帘线在轿车子午线轮胎带束层中的应用。结果表明，以1×2×0.30SHT钢丝帘线替代1×3×0.30HT钢丝帘线应用于轿车子午线轮胎带束层，成品轮胎充气外缘尺寸、强度、脱圈阻力、耐久性能和高速性能变化不大，轮胎质量减小，生产成本降低。
英文摘要:
      The application of 1×2×0.30SHT steel cord in the belt of PCR tire was investigated.The results showed that，by using 1×2×0.30SHT steel cord instead of 1×3×0.30HT steel cord in the belt of PCR tire，the overall diameter of inflated tire，strength，bead unseating resistance，endurance and speed performance of finished tire changed a little，and the tire weight and production cost were reduced.
Author NameAffiliation
WANG Chuansheng Qingdao University of Science and Technology 
JIANG Yongdian Qingdao University of Science and Technology；Jiangsu Hankook Tire Co.，Ltd 
BIAN Huiguang Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭