| 胡源,华松,蒋中凯.29.5R25工程机械子午线轮胎的设计[J].轮胎工业,2009,(2):91-93 |
二维码（扫一下试试看！） |
| 29.5R25工程机械子午线轮胎的设计 |
| Design of 29.5R25 OTR tire |
| |
| DOI： |
| 中文关键词: 工程机械子午线轮胎 结构设计 施工设计 耐久性能 |
| 英文关键词: OTR tire structure design construction design endurance |
| 基金项目: |
| 中图分类号:U463.341+.5/.6 |
|
| 摘要点击次数: 1023 |
| 全文下载次数: 14 |
| 中文摘要: |
| 介绍29.5R25工程机械子午线轮胎的设计。结构设计：外直径 1 873 mm，断面宽 776 mm，行驶面宽度 659.6 mm，行驶面弧度高 35.3 mm，胎圈着合直径 629.92 mm，胎面采用宽横沟块状花纹。施工设计：钢丝圈采用11-17-12正六角形结构，安全倍数达到8.0；胎体采用7×7结构单层钢丝帘布，安全倍数达到6.6；带束层采用多角度4层钢丝帘布，安全倍数达到7.6。成品性能试验结果表明，轮胎充气外缘尺寸、耐久性能等均符合设计要求。 |
| 英文摘要: |
| A design of 29.5R25 OTR tire was described. In structure design，the following parameters were taken：overall diameter 1 873 mm，cross sectional width 776 mm，width of running surface 659.6 mm，radian height of running surface 35.3 mm，bead diameter at rim seat 629.92 mm，and wide cross-groove block pattern for tread.In construction design，the following processes are taken：11-17-12 positive hexagonal structure for wire ring，the safety factor 8.0；7×7 single steel cord for carcass ply，the safety factor 6.6；4-layer multi-angle steel cord for belt ply，the safety factor 7.6.It was confirmed by the test on finished tire that the inflated overall diameter and endurance met the design targets. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
