文章摘要
梁俐,刘锟,李炜,夏勇,夏源明.全钢载重子午线轮胎钢丝圈受力分析[J].轮胎工业,2004,(10):594-597 本文二维码信息
二维码（扫一下试试看！）
全钢载重子午线轮胎钢丝圈受力分析
Analysis for stress-strain in bead wire of BTR tire
  
DOI：
中文关键词: 全钢载重子午线轮胎  胎圈钢丝  应力分布  安全系数
英文关键词: BTR tire  bead wire  stress distribution  safety factor
基金项目:
中图分类号:TQ330.38+9；U463.341+.6
作者单位
梁俐 佳通轮胎（中国）研发中心 
刘锟 佳通轮胎（中国）研发中心 
李炜 中国科学技术大学 力学和机械工程系 
夏勇 中国科学技术大学 力学和机械工程系 
夏源明 中国科学技术大学 力学和机械工程系 
摘要点击次数: 1138
全文下载次数: 717
中文摘要:
      以10.00R20全钢载重子午线轮胎为例进行钢丝圈钢丝受力分析。利用有限元模型计算得到各种充气压力下钢丝圈钢丝的应力分布特征，并进一步得到钢丝圈钢丝的最大应力和平均应力，它们基本上与充气压力成正比；以最大应力和平均应力分别计算得到的钢丝圈安全系数相差2.3倍。有限元计算结果还表明，超载情况下钢丝圈的安全性能明显下降。
英文摘要:
      The stress-strain in the bead wire was analyzed taking 10.00R20 BTR tire as example.A FE model was used to obtain the stress distribution in bead wire of BTR tire under different inflation pressures as well as the maxium stress and the average stress in bead wire. It was found that both the maximum stress and average stress in bead wire were basically proportional to the inflation pressure;the safty factor calculated from the maximum stress was greater than that from the average stress by a factor of 2.3;and the safty of bead wire decreased significantly under overload of tire.
Author NameAffiliation
LIANG Li Chinese Development Centre of Grandtour Tire 
LIU Kun Chinese Development Centre of Grandtour Tire 
LI Wei China University of Science and Technology 
XIA Yong China University of Science and Technology 
XIA Yuanming China University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭